Aanvil Audio
presents
LFD

Integrated Amplifier
*Half Width Separates: Linestage LS0, Phonostage MM0, Powerstage PA0
Full Width Separates: Linestage LS1 LS2 and LSB, Phonostage MC1 and MC2, Powerstage PA1 PA2 and PA2M
Passive Preamplifier
Digital to Analogue Converters
Mistral Collection: Integrated, Phonostage, Linestage, Powerstage, CD Player
Cables and Accessories
 Half Width Separates

17k IMAGE: the LFD LS0, MM0 and PA0

LINK: LinestageLINK: PhonostageLINK: Powerstage


------ Linestage ------

Linestage LS0

Linestage LS0 is a dedicated line level amplifier offering comprehensive input and tape recording selection. A low output impedance endows the amplifier with the ability to drive relatively long or highly capacitive cables with ease and removes bandwidth limitations inherent in some passive preamplifiers. The LS0 utilises a zero feedback topology very similar in concept to the more expensive linestage LS1. Dual mono construction, star earthing and custom LC-OFC and PC-OCC wiring also contribute to the resolution and transparency of this amplifier.

Linestage Specification 
Gain                 9dB
Output Impedance     15R
Min Input Impedance  8k2
Bandwidth            1Hz-100kHz
Gross Weight         6kg
Size                 300mm x 376mm x 62mm
TOP



------ Phonostage ------

Phonostage MM0

The phonostage MM0 is a self-contained amplifier providing equalisation of the electrical signals from Moving Magnetic or high output Moving Coil cartridges. The gain can be altered to suit both types, simply by changing over a toggle switch on the printed circuit board. For enhanced performance a custom hybrid active/passive power suuply utilising a 200VA transformer has been employed. Other features include: dual mono construction, star earthing and dedicated PC-OCC wiring.

Phonostage Specification 

Gain at 1kHz         53dB(MC) 38dB(MM)
Input Load           47k
Bandwidth            7Hz-60kHZ
Gross Weight         6kg
Size                 300mm x 376mm x 62mm
TOP



------ Powerstage ------

Powerstage PA0

Powerstage PA0 is a MOSFET power amplifier designed to drive the majority of loudspeakers presently available. The high input sensitivity has the advantage of allowing the use of passive preamplifiers if required. The circuit for this amplifier has been derived from the high performance Powerstage PA1. Essentially, the input stages are run in full Class A and feed an enriched ClassA/B MOSFET output stage. DC coupling from input to output, custom LC-OFC wiring and split input/output power supplies all help realise outstanding clarity and resolution.

Powerstage Specification 

Power into 8R        50W
Input Sensitivity    0.4V for full output
Input Impedance      47k
Bandwidth            1Hz-50kHz
Gross Weight         6kg
Size                 300mm x 376mm x 62mm
TOP


LINK: Aanvil Audio main menu
LINK: LFD main menu